2750 South Hardy Drive, Suite 1A, Tempe, AZ 85282

Everything You Need To Know About Swimming Pool Filter Replacement

A swimming pool filter replacement is an important part of keeping your pool clean and functional. It’s a good idea to familiarize yourself with the different types of filters and how to replace them before you need to do so. In this guide, we’ll outline everything you need to know about swimming pool filter replacement, from the different types of filters to the steps involved in the replacement process.

We’ll also provide some tips on how to prolong the life of your swimming pool filter and keep your pool looking its best. Let’s get started!

What is a swimming pool filter and what it does

A swimming pool filter is a device that helps keep your pool clean and functional. It removes debris and impurities from the water, keeping it clean and safe for swimming. There are several different types of filters available, each with its benefits and drawbacks. It’s important to familiarize yourself with the different types before you need to replace your filter.

Types of Swimming Pool Filter

There are several different kinds of swimming pool filter cartridges available. Here are the four most common types of filters you might find in your backyard or community pool, with a brief description of each:

Sand

The simplest type of filter cartridge, and is an effective method for trapping larger particles and debris before they reach the pool’s pump. This method can be pricey to operate and maintain, as fine sand particles eventually need to be cleaned out.

Diatomaceous Earth

This type of cartridge is made from silica-based diatom shells which are very effective at trapping smaller particles and repels algae growth. However, DE filters require much more careful maintenance than other types of cartridges, as using harsh chemical cleaners or brushing the filter may damage it over time.

Cartridge

A common type of cartridge for above-ground pools and in-ground pools with a multiport valve. The gap between pleats must be hand-cleaned each time you service the filter; otherwise, the filter could become damaged over time if debris collects in this space.

Clean & Clear Plus Cartridge pool filters are built to resist corrosion, reinforced with fiberglass, injection-molded, and has a polypropylene filter tank that features superior strength and reliability. There is no need for backwashing. Simply remove the cartridges and rinse with a garden hose, making this cartridge eco-friendly.

Cartridge with Backwash Valve

A cartridge filter with a backwash valve allows you to clean the pleats without dismantling the filter by pumping water backward through it, drawing dirt and other particles away from the cartridge. These filters are typically very effective at trapping debris and may provide cleaner water than sand filters over time. However, they can be more expensive upfront than sand filters and require more careful maintenance.

Backwashing Your Filter

So now that you know about the different types of swimming pool filter cartridges, let’s talk about how to backwash your swimming pool filter properly so you avoid damaging it over time. The first step is to close your multiport valve if your pool has one installed; otherwise, stand by as your pool filter fills with pressure.

Next, disconnect the plumbing line from the multiport valve (if applicable) and place it in a bucket or other container. Turn off your pool pump and allow the water to drain out of the lines into another container. Remove any strainer baskets that are attached to your plumbing lines; if you don’t, they will become damaged during the backwashing process.

Once all this is done, turn on your pump while slightly opening up your multiport valve until you can feel the water flowing backward through it toward the outlet port. Allow this process to continue for about 1-2 minutes before turning off your pump again. Then, refill your pool by allowing water to flow normally through the multiport valve using your pump.

Make sure to allow your pool filter cartridge to drain completely after backwashing before you put it away or attempt to clean the pleats. Failure to do so may diminish its effectiveness over time. Also, reattach any strainer baskets that were removed during the process, but don’t forget to remove them again when you service your pool filter in 3-6 weeks!

Why do I need to replace my swimming pool filter cartridge?

A worn-out or dirty filter can allow sand, dirt, and other debris into the water – increasing the risk of someone getting hurt. Also, a clogged filter will not be able to properly clean the water – leading to higher levels of chlorine usage that may irritate swimmers’ skin and eyes. Finally, a worn-out or dirty filter does not properly protect your pool equipment from corrosion and can lead to failure sooner than expected.

How do I choose the correct pool filter

The best way to choose the correct pool filter is to consult with a qualified professional. They will be able to help you determine the size and type of filter that is best suited for your specific pool.

Replacing your pool filter cartridge

Now that you’ve successfully backwashed your swimming pool filter, let’s talk about how to replace the cartridge. To begin with, make sure not to damage any gaskets or seals on your old cartridge; if these are damaged, they will need replacing as well. Then, simply disconnect the water supply line and remove the cartridge from your filter.

Carefully place the new cartridge into the same spot as the old one and connect it to your plumbing lines, ensuring that all gaskets and seals are properly in place. Turn on your pump and check for proper air and water flow throughout the system before closing off your multiport valve or pool return.

Now, turn off and unplug your pump before checking for leaks underneath the cartridge by putting a few drops of soapy water onto any areas where connections have been made. If you find any leaks, tighten them gently until they stop; then allow everything to dry completely before turning on your pool’s filtration systems again!

Replacing your pool filter cartridge

How often you should replace your swimming pool filter cartridge or elements depends on the type of filter you have, how often you use your pool, and the size of your pool. Typically, cartridge filters should be replaced every 3-6 weeks, while DE and sand filters may last 6-12 months before needing to be replaced. However, if you notice reduced water flow during backwashing, an increase in startup time after cleaning, increased pressure drop, or decreased water clarity, it may be time to change the cartridge.

How can you tell when it’s time to replace your swimming pool filter cartridge

How can you tell when it’s time to replace your swimming pool filter cartridge? The easiest way to tell when it’s time to replace your swimming pool filter cartridge or elements is to refer to your owner’s manual. Typically, most cartridges should be replaced every 3-6 weeks, while DE and sand filters may last 6-12 months before needing to be replaced. If you’re not sure when to replace your filter cartridge or elements, contact the manufacturer or a qualified professional for advice.

Although there are a few things you can look for such as:

Decreased water flow through the system

This means that the cartridge is becoming clogged and needs to be replaced.

The cartridge is visibly dirty

If you find that your cartridge is dirty after cleaning it, don’t panic; simply purchase a replacement and follow the instructions above for installing it.

Experiencing problems with your pool pump

Pool pump issues such as shutting off unexpectedly could be an indication that the filter cartridge needs to be replaced.

The cartridge needs to be replaced more frequently than normal

If you find that your cartridge is needing to be replaced before the designated time, it may indicate an issue with the filter or the pool itself. Contact a qualified professional for advice on how to proceed.

Algae growth

If your cartridge is dirty, it allows sunlight to enter the system and increases algae growth rates. This means that the cartridge is becoming clogged and needs to be replaced as soon as possible!

Water pressure changes

If you find that your water pressure has changed since your filter cartridge was last replaced, this may indicate a problem with the cylinder or valve seals; if so, they will need to be replaced as well! Contact a qualified professional for advice on how to proceed.

Decreased water flow through the system

This means that the cartridge is becoming clogged and needs to be replaced.

Cloudy pool water and/or murkiness in water clarity after cleaning

If you notice cloudy or murky water and/or decreased water clarity after your cartridge has been cleaned, this means that the cartridge is dirty and needs to be replaced.

Off odors coming from the water

If the smell is particularly foul, it may indicate algae growth.

What’s the best way to go about replacing your swimming pool filter cartridge – DIY or hire a professional service provider?

There are pros and cons to both DIY replacement of your cartridge and hiring a professional service provider. If you decide that you are up for the task of replacing your cartridge, always follow the manufacturer’s directions for use.

If you’re installing a sand pool filter system, it is recommended that you hire a professional service provider for this type of work because sand filters are very heavy – often too heavy for an average homeowner to lift! Professionals will have all of the tools necessary for removing your old cartridge correctly and disposing of the waste responsibly. A word of caution: always empty your sand filter into a plastic bag before disposal; never empty directly into the garbage container or on the ground where anyone could step in it.

When hiring a service provider, ask them about what they will be doing in addition to replacing your pool filter cartridge or elements and request a quote. Also, if the price seems too good to be true, it probably is! Be prepared for hidden fees and markups when dealing with unsavory companies trying to take advantage of customers in need.

What to look for when hiring a professional pool service company

When hiring a professional pool service company, be sure to ask the following questions:

Be sure that you are hiring someone who is licensed, insured, and has access to the proper tools for the job. Make it a point to meet with prospective contractors in person so you can get a sense of their professionalism and demeanor.

If you’re installing a sand pool filter system, it is recommended that you hire a professional service provider for this type of work because sand filters are very heavy – often too heavy for an average homeowner to lift! Professionals will have all of the tools necessary for removing your old cartridge correctly and disposing of the waste responsibly. A word of caution: always empty your sand filter into a plastic bag before disposal; never empty directly into the garbage container or on the ground where anyone could step in it.

When hiring a service provider, ask them about what they will be doing in addition to replacing your pool filter cartridge or elements and request a quote. Also, if the price seems too good to be true, it probably is! Be prepared for hidden fees and markups when dealing with unsavory companies trying to take advantage of customers in need.

Here are some very important final tips to consider when you’re about to replace your swimming pool filter cartridge:

BRIPHEN is licensed, bonded and insured to provide full pool service and repairs!

Call Today for Service


(480) 680-9737

Briphen Pool Cleaning  Tempe

https://www.google.com/maps?cid=1336594694450851591
2750 S Hardy Dr, Tempe, AZ 85282
(480) 741-2798
https://briphen.com/

Briphen Pool Cleaning  Tempe on the news

Check out our  pool cleaning services on google
https://goo.gl/maps/EJE99FnWACjVRG9T9